Operation method of foam granulator:
1. There are two heating rings on the upper and lower screws of the foam granulator, and there is a switch on each heating ring, which can be opened and closed at will according to the temperature required during processing.
2. When the EPS foam pelletizing machine is working, first heat the upper and lower barrels for 20-40 minutes, then take a piece of foam and place it on the machine head and press it lightly. If the foam can soften and melt, it means that the barrel is heated to the working temperature (180 Degree or so), you can boot to work.
3. Add a small amount of foam to the hopper first, if the extruded material has melted, then a large amount of material can be unloaded to start work. If the temperature is too high during work, you can cut off the head heating power and continue working.
4. When theEPS foam pelletizing machine is working, one or two layers of 20-80 mesh filter screen or other suitable number of filter screens can be added to the lower screw head as required (the higher the number of filter screens, the cleaner the impurities will be filtered). There should be a few more nets. If the strips are not smooth during work, it means that the filter is clogged, and the filter should be replaced in time. The steel filter is burned to remove impurities and can be recycled.