How to extend the life of metal shredder? The main shaft of the shredder is one of its important structures, the influence of the bending of the main shaft:
1. Affect the service life of the spindle;
2. The blade produces interference cutting, which reduces the service life of the blade;
3. Affect the size of processed materials;
4. Reduce bearing service life;
5. Not easy to assemble;
6. If the reducer is directly connected, the service life of the reducer will be reduced; the belt drive is adopted, which is easy to skip and reduce the service life of the triangle belt.
Therefore, the spindle accuracy must be strictly required to ensure the service life of the equipment, increase the yield, and meet customer requirements.
The correction steps of the tire shredder are as follows:
1. Use a press to correct the fourth stage.
2. Use a four-jaw chuck to clamp the fifth section, use the center frame support structure to support the third section, and align the center of the fourth section. Punch the center hole, then use a thimble to hold it, remove the center frame, finish the front section, the third section, and the empty part of the rough car.
3. Spindle head change processing. Use a four-jaw chuck to clamp the front section, use a center frame support structure to support the fifth section, and align the center of the fourth section. Punch the center hole, then use a thimble to hold it, remove the center frame, and finish turning the fifth section and the empty part of the rough turning.
In the metal shredder products, different models correspond to different output, and also correspond to the output materials. Before starting the metal crusher, it is necessary to strictly check whether the installation of the various parts of the machine meets the requirements and whether the bolts are loose. The materials allowed to be crushed are flammable and explosive products to avoid accidents. Secondly, when feeding materials to the machine, they should be evenly fed to avoid blocking the machine and causing the motor to overload. The normal operation of the machine should be guaranteed. It is important to check whether the components are worn or broken, so as not to damage other main components, and take fire protection measures.
When the metal crusher is in operation, in addition to the correct and firm installation, the lubrication function of the machine should also be done to ensure the normal operation of the machine. Only this good can increase the life of the metal crusher equipment. The premise is that the quality of the machine is good, and the correct operation of the user can ensure the service life of the metal crusher.