2.5t/H Waste Plastic PP PE Film Recycling Washing Drying Washing Machine

With the aim of pursuing zero-defect quality, we strive to provide customers with cost-effective and high grade buy plastic shredder machine, waste plastic recycling granules making machine, Plastic Films Pelletizing Machine. Welcome all nice buyers communicate details of solutions with us!! We take measure at any price to attain essentially the most up-to-date gear and procedures.

Product description

1. The shredded pieces and film bags will be put into the Plastic Squeezing Pelletizer Machine. Driven by the reducer, the inner screw pushes the material into the drainage bin. Then, the hydraulic cylinder is pressed down by the dynamic pressure tank to form a new tapered port with the fixed pressure tank cone port, so that the material is left in the drainage tank until there is too much material. Then the material will be squeezed and excess water will be discharged through the drain hole.

2. The current of the reducer controls the vertical movement of the hydraulic cylinder. This current can be set manually. When the current is higher than the horizontal current, the hydraulic cylinder raises the silo so that the material is squeezed out; when the current is lower than the horizontal current, the hydraulic cylinder lowers the silo so that the water is discharged and the squeeze Dry effect.

Product features:

1. The unique principle of squeeze drying and dehydration solves the problem of difficult dehydration of traditional film plastics;

2, This machine is the effect of squeezing is good: more than 95% guaranteed;

3, This machine has advanced technology, low energy consumption, low noise, simple operation, safety, etc.

Main technical parameter:

Our machine compare other factory advantages:

1.Our squeezing machine can adjust the final product size as customer require, can adjust different capacity! The final product has semi-plastization and full-plastization!

2.Different screws and barrel ,Our screw L/D  is 6:1, and other factory is L/D is 4:1 , for example diameter 350mm screw, length is 2100mm. if L/D:4:1, the length is 1400mm.

Why we choose L/D is 6:1 ,not 4:1. Because It is very import to material!

3.Our electric control box has big space!!! The space is large enough, the control cabinet is easier to dissipate heat, and the equipment runs more stable!

All machine list:

Machine Main Parts :

The Raw Materials And Final Products:

Machine Delivery:

Our Service:

1. We will provide all the machines for the complete production according to customer's requirements.

2. We will provide complete service for factory layout and other information to help customer to build the factory.

3. We will provide good service for machine installation and training, until the customers can run the machines and make stably production.

4. Except one year quality guarantee, we will provide after-sell service for all the life.

5. For long-term cooperation, we always provide good quality, good price and good service to customer.

With advanced technology and customer-responsible service concepts, we have served many customers and accumulated rich production experience of 2.5t/H Waste Plastic PP PE Film Recycling Washing Drying Washing Machine. With the development concept of people-oriented and quality first, our company strictly manages all aspects and is committed to long-term development with customers and serving the society. The best and original quality for spare parts is a most important factor for transportation.